Challenger V6-3.5L (2009)
14. Lower vehicle until front tires contact floor but rear is still suspended. Place jack stands under each rear suspension spring link. Place an
appropriate wooden block between stand and link to avoid damaging spring link, then lower vehicle until full vehicle weight is supported by
suspension.
15. Tighten camber link fasteners (2) to:
-
Bolt at crossmember - 85 Nm (63 ft. lbs.).
-
Bolt nut at knuckle - 98 Nm (72 ft. lbs.).
16. Tighten shock absorber lower mounting bolt nut (4) to 72 Nm (53 ft. lbs.).
