Challenger V6-3.5L (2009)
NOTE: Rear coil springs are interchangeable.
1. Install upper (1) and lower (5) isolators on coil spring (2).
NOTE: Before installing coil spring, make sure isolators (1 and 5) are completely installed on ends of spring.
2. Install coil spring with isolators into spring pocket of spring link (1) fitting lower isolator (2) to shape of pocket, then align top of spring with body
mount.
3. Install shock absorber (3) by setting lower end into pocket in spring link (4), then tipping top inward until aligned with upper mounting holes.