Challenger V6-3.5L (2009)
Wheel Bearing: Service and Repair
Front Hub and Bearing - Removal
REMOVAL
1. Raise and support vehicle, See: Vehicle Lifting/Service and Repair.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Access and remove front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
4. Remove dust cap (2). When doing this, avoid damaging internal bore of hub to preserve seal integrity.
5. Remove hub nut (1).
6. Slide hub and bearing off knuckle spindle.
