Challenger V6-3.5L (2009)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range Sensor - Installation
INSTALLATION
1. Install the TRS (2) to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw (1) and torque to 5 Nm (45 in. lbs.) torque.
3. Install the manual shaft seal (1).
4. Install valve body to the transmission.See: Valve Body/Service and Repair/Removal and Replacement/42RLE Automatic Transmission/Valve
Body - Installation
