Challenger V8-5.7L (2010)
Antenna Cable: Service and Repair
Instrument Panel Antenna Cable - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery System - Battery Reconnection .
1. Install cable to instrument panel.
2. Connect antenna cable at right side cowl area.
3. Install the right side cowl trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel - Installation.
4. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation.
5. Install the radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Radio - Installation.
6. Connect the battery negative cable.
