Challenger V8-5.7L (2010)
Keyless Entry Module: Customer Interest
Keyless Systems - Intermittently Inoperative
NUMBER: 08-010-10
GROUP: Electrical
DATE: May 14, 2010
THE wiTECH DIAGNOSTIC APPLICATION IS THE PREFERRED METHOD FOR FLASHING ECUs.
HELP USING THE wiTECH DIAGNOSTIC APPLICATION FOR FLASHING AN ECU IS AVAILABLE BY SELECTING "HELP" THEN "HELP
CONTENTS" AT THE TOP OF THE wiTECH DIAGNOSTIC APPLICATION WINDOW.
THE wiTECH SOFTWARE LEVEL MUST BE AT RELEASE 10.04 OR HIGHER TO PERFORM THIS PROCEDURE.
StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.
SUBJECT:
Flash: WIN Module For Intermittent RKE Functions
OVERVIEW:
This bulletin involves flash reprogramming the Wireless Ignition Node (WIN) with new software.
MODELS:
2010
(DS)
Ram Truck 1500
2010
(JC)
Journey
2010
(LC)
Challenger
2010
(LE)
International 300 or Charger
2010
(LX)
300 and/or Charger
2010
(WK)
Grand Cherokee
2010
(WH)
International Grand Cherokee
2010
(XK)
Commander
2010
(XH)
International Commander
SYMPTOM/CONDITION:
Customer may experience intermittent FOBIK operating characteristics. Dealers are required to verify the manufacturer of the Wireless Ignition Node
Module (WIN) and if necessary, Flash the WIN with updated software.
DIAGNOSIS:
If the vehicle operator describes the above Symptom/Condition, perform the Repair Procedure.
REPAIR PROCEDURE:
Check manufacturer of WIN Module
1. Using the wiTECH Diagnostic Application verify the WIN module is manufactured by Marquardt
2. Click on the reports tab on the top of the main page.
3. Select Run/View Reports.
4. Select ECU Details report.
5. Click on the arrow key to run the report.
6. Scroll to the bottom to find the WIN section.