dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Speaker - Removal|Page 5275 > < Speaker - Removal|Page 5273
Page 3
background image

NOTE: Perform a battery reconnect procedure anytime the battery has been disconnected.See: Starting and Charging/Battery/Service and

Repair/Procedures/Battery System - Battery Reconnection .

1. Disconnect and isolate the battery negative cable.
2. Remove the quarter trim panels. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment

Trim/Quarter Trim Panel - Removal.

3. Remove the rear shelf trim. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Rear Shelf Panel - Removal.
4. Remove the mounting fasteners.
5. Disconnect the electrical connector and remove the subwoofer.

SUBWOOFER - TRUNK MOUNT

NOTE: Perform a battery reconnect procedure anytime the battery has been disconnected.See: Starting and Charging/Battery/Service and

Repair/Procedures/Battery System - Battery Reconnection .

1. Open the decklid.
2. Disconnect and isolate the battery negative cable.
3. Remove the top mounting fastener (2).
4. Disconnect the electrical connector (3).
5. Remove the subwoofer (1) from the vehicle.

Speaker - Removal|Page 5275 > < Speaker - Removal|Page 5273