Challenger V8-5.7L (2010)
2. Remove the two driver airbag module mounting bolts (Figure 1).
3. Separate the driver airbag module from the steering wheel, disconnect the module wiring harness and set the airbag module aside.
4. Disconnect the wire harness white connector from the steering wheel (Figure 2).
5. Remove the steering wheel retaining bolt (Figure 2).
6. With the steering wheel in the straight ahead position, remove the steering wheel from the steering column.
7. Using plastic trim stick C4755 or equivalent, carefully pry the steering wheel switch covers from the steering wheel (Figure 2).
CAUTION:
Use extreme care not to damage the steering wheel when prying the steering wheel switch covers from the steering wheel.
