Challenger V8-5.7L (2010)
Trunk / Liftgate Hinge: Service and Repair
Hinge - Installation
INSTALLATION
1. Position the lower bracket of the decklid hinge (1) to the drain trough on the vehicle.
2. Install and tighten the fasteners (2) that secure the hinge to the drain trough. Tighten to 28 Nm (21 ft. lbs.).
3. Position the decklid (1) to the upper hinge bracket (3) on the vehicle.
4. Install and tighten the fasteners (2) that secure the hinge to the decklid. Tighten to 28 Nm (21 ft. lbs.).
5. Install the support cylinder onto the decklid hinge. See: Trunk / Liftgate Shock / Support/Service and Repair/Gas Prop - Installation.
6. Remove the fixture being used to support the decklid for service and close the decklid.
7. Adjust the decklid hinge position as necessary to achieve proper spacing and operation.
