Challenger V8-5.7L (2010)
5. Push caliper guide pins into caliper adapter to clear caliper mounting bosses when installing.
6. Rotate caliper upward, aligning upper mounting boss with upper guide pin.
NOTE: Before installing caliper guide pin bolts, clean guide pin bolt threads and apply Mopar(R) Lock AND Seal Adhesive or equivalent.
7. Install upper caliper guide pin bolt (1). While holding guide pin (3) stationary tighten bolt to 31 Nm (23 ft. lbs.).
8. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See:
Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
9. Lower vehicle.
10. Pump brake pedal several times to set pads to caliper and brake rotor.
