Challenger V8-5.7L (2010)
1. Clean hub face (1) to remove any dirt or corrosion where rotor mounts.
2. Install brake rotor (3) over studs on hub and bearing (7).
3. Slide caliper with pads (2) over brake rotor (3) and align with knuckle (8).
4. Install caliper mounting bolts (1). Tighten bolts to 190 Nm (140 ft. lbs.).
5. Install tire and wheel assembly. Tighten wheel mounting nuts to 150 Nm (110 ft. lbs.) torque. See: Maintenance/Wheels and Tires/Service and
Repair/Removal and Replacement/Tires and Wheels - Installation
6. Lower vehicle.
7. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.