Challenger V8-5.7L (2010)
4. Guide cable strand (3) up through lever bracket and press cable housing retainer (4) into bracket allowing retainer fingers to lock cable in place.
5. If original parking brake lever is being installed:
a. Connect front parking brake cable strand (1) to cable connector (2) secured in retaining fork.
b. Once front parking brake cable strand is completely seated in cable connector (2), lift cable connector out of retaining fork using pliers and
slowly allow lever mechanism to take up slack in cable.
6. If NEW parking brake lever is being installed:
a. Connect front parking brake cable strand (3) at lever connector (2).
b. Once front parking brake cable strand is completely seated in cable connector (2), remove pin locking out automatic tensioning spring.
7. Install steering column opening cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Steering
Column Opening Cover - Installation
8. Raise and support vehicle.
