Challenger V8-5.7L (2010)
Parking Brake Shoe: Service and Repair
Installation
INSTALLATION
NOTE: The following procedure may be used to install shoes on either side of the vehicle.
NOTE: Inspect springs, adjuster, lever and aluminum shoe anchor pin for wear or damage prior to installation. Replace as necessary.
1. Install lower brake shoe hold-down pin (7) through rear of support (2).
2. Install lower shoe (6) against support plate (2).
3. Install lower brake shoe hold-down clip (7).
4. Install shoe actuator lever (1) on end of parking brake cable (2). Make sure actuator lever is positioned with word "UP" facing outward.