Challenger V8-5.7L (2010)
10. Lower vehicle.
11. Remove upper radiator hose.
CAUTION: Bolts are installed with threadlocker. Use hand tools to remove the upper radiator mounting bolts.
12. Remove upper radiator mounting brackets (1) and bolts (2).
13. Remove upper condenser mounting bolts.
14. Separate condenser assembly from radiator.
15. Tilt radiator toward engine and remove radiator from vehicle.
Engine Cooling Radiator - Installation
INSTALLATION
1. Position the radiator into engine compartment. Seat the radiator assembly lower rubber isolators into the mounting holes in radiator lower support.
2. Install the radiator mounting bracket (1) and bolts (2). Tighten to 12 Nm (106 in. lbs.).
3. Position the condenser on radiator and install upper mounting bolts. Tighten bolts to 6 Nm (50 in. lbs.).
4. Raise the vehicle.
