Challenger V8-5.7L (2010)
CAUTION: When installing connecting rods, make sure the wide side (1) is towards the crankshaft and narrow sides (2) face each other.
CAUTION: Always replace the Rod Bolts whenever they are loosened or removed.
14. Lubricate the new rod cap bolts with clean engine oil, install and tighten to 21 Nm (15 ft. lbs.) plus 90°.
15. Install the timing chain cover See: Timing Components/Timing Cover/Service and Repair/Engine Timing Cover(s) - Installation.
16. Install the new oil pan gasket/windage tray and oil pan See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan - Installation.
17. Install the engine oil dipstick tube and dipstick.
18. Lower the vehicle.
19. Using the Engine Lift Fixture 8984A (1), Engine Lift Adapter 8984-UPD (2) and the Engine Support Fixture 8534B (3) lower the engine into
position and remove.
20. Raise and support the vehicle.
