Challenger V8-5.7L (2010)
CAUTION: The rocker shaft assemblies are not interchangeable between the intake and the exhaust, failure to install them in the correct
location could result in engine damage. The intake rocker arms (1) are marked with the letter "I" (2).
CAUTION: The piston must be at TDC and both valves closed on the cylinder to be serviced.
CAUTION: The longer pushrods are for the exhaust side and the shorter pushrods are for the intake side.
NOTE: Pushrods must be installed in the same order as removed.
NOTE: If removing the intake valve spring, install the pushrod retainer 9070 (1).
