Challenger V8-5.7L (2010)
3. If removed, install the engine mount brackets (1) and tighten bolts to 95 Nm (70 ft. lbs.).
4. Position the hydromount (3) on the engine and tighten bolts (1,2) to 95 Nm (70 ft. lbs.).
5. Install the engine mount heat shield (1) and securely tighten the fasteners (2,3).
6. Lower the vehicle.
7. Lower the engine using the engine support fixture 8534B (1) and remove support fixture.
8. Raise and support the vehicle.
