Challenger V8-5.7L (2010)
Front Crankshaft Seal: Service and Repair
Front Crankshaft Oil Seal - Removal
REMOVAL
1. Disconnect negative cable from battery.
2. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive Belt
- Removal.
3. Drain cooling system See: Cooling System/Service and Repair.
4. Remove upper radiator hose.
5. Remove radiator shroud attaching fasteners.
6. Remove radiator cooling fan and shroud See: Cooling System/Radiator Cooling Fan/Service and Repair/Cooling Fan - Removal.
7. Remove crankshaft damper bolt.
8. Remove damper (1) using bolt grip type puller (2)See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and
Repair/Vibration Damper - Removal.
9. Using Seal Remover 9071 (1), remove crankshaft front seal (2).