Challenger V8-5.7L (2010)
Oil Temperature Sensor/Switch: Service and Repair
Oil Temperature Sensor - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive
Belt - Removal
3. Remove the generator upper mounting bolt.
4. Raise and support the vehicle.
5. Remove the lower splash shield retaining bolts (1) and the splash shield.
6. Remove the generator lower mounting bolts (1).
7. Lower the vehicle.
8. Position the generator aside to gain access to the oil temperature sensor.
