Challenger V8-5.7L (2010)
11. Position the oil pump (1) onto the crankshaft and install the oil pump retaining bolts (2) finger tight.
12. Using the sequence shown, tighten the oil pump retaining bolts to 28 Nm (21 ft. lbs.).
13. Verify the slide bushings (1) are installed in the timing chain cover.
14. Install the timing chain cover See: Timing Cover/Service and Repair/Engine Timing Cover(s) - Installation
15. Fill the engine with oil.
16. Fill the cooling system See: Cooling System/Service and Repair
17. Connect the negative battery cable.
18. Start the engine and check for leaks.
