Challenger V8-5.7L (2010)
1. Prior to installation, make sure all gasket mating surfaces (1, 2) are clean and free of any debris, (left side shown, right similar).
2. Position the exhaust manifold gasket and manifold.
3. Left Side: Using the sequence shown, Install the exhaust manifold retaining bolts and tighten to 25 Nm (18 ft. lbs.).
4. Right Side: Using the sequence shown, install the exhaust manifold retaining bolts and tighten to 25 Nm (18 ft. lbs.).
5. Install the heat shield and tighten nuts to 8 Nm (70 in. lbs.).