Challenger V8-5.7L (2010)
9. Remove the six screws (1) that secure the front floor distribution duct (2) to the bottom of the air distribution housing (3) and remove the duct.
10. Carefully cut the foam seal (1) along the parting line (2) of the two halves of the air distribution housing (3). If the seal is deformed or damaged, it
must be replaced.
11. Remove the screws (4) that secure the two halves of the air distribution housing together.
12. Carefully separate the left half of the air distribution housing (1) from the right half of the housing (2).
13. Remove the center partition (3).
