Challenger V8-5.7L (2010)
4. Lift the close out cover upward slightly to disengage the hook on the back of the cover from the ledge on the outboard end of the center tail lamp
housing.
5. Remove the two screws (2) that secure each outboard end of the center tail lamp (3) to the deck lid (1).
6. Remove the four wing nuts (1) that secure the lamp to the inside of the deck lid.
7. Remove the two push pin retainers (3) from the bottom of the center tail lamp unit.
8. Carefully pull the center tail lamp away from the deck lid far enough to access and disconnect the body wire harness connector (2) from the lamp
connector receptacle.
9. Remove the center tail lamp from the vehicle.
