Challenger V8-5.7L (2010)
Variable Valve Timing Solenoid: Service and Repair
Oil Intake Control Valve - Removal
REMOVAL
1. Remove intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal and Replacement/Intake
Manifold - Removal.
2. Disconnect oil control valve electrical connector (2).
3. Remove oil control valve fastener (1).
NOTE: To remove the oil control valve, the engine must be at room temperature.
4. Rotate the oil control valve to break the seal. Pull the oil control valve out.