Challenger V8-5.7L (2010)
6. Disconnect fuel line (1) at fuel rail (2) fitting See: Fuel Line Coupler/Service and Repair.
7. Disconnect injector electrical connectors.
8. Remove four fuel rail mounting bolts (1).
9. Gently rock and pull left side of fuel rail until fuel injectors just start to clear machined holes in intake manifold. Gently rock and pull right side of
rail until injectors just start to clear intake manifold head holes. Repeat this procedure (left/right) until all injectors have cleared machined holes.
10. Remove fuel rail (with injectors attached) from engine.
