Challenger V8-5.7L (2010)
Air Bag: Service and Repair
Driver Air Bag - Installation
INSTALLATION
NOTE: The driver airbag trim cover is available for service separately. If the horn switch is faulty or the trim cover is damaged, the airbag
cushion assembly may be transferred to a new trim cover. If the airbag is defective, the entire driver airbag and driver airbag trim
cover must be replaced as an assembly.
1. Position driver airbag (3) in steering wheel (1) near mounting location.
2. Connect the two airbag squib connectors (2) and the horn connector (4).
3. Position the driver airbag mounting screws (2) into the driver airbag. From behind the steering wheel (1) install the two screws (5) to the driver
airbag. Torque the two screws (5) to 10 Nm (89 in. lbs.).
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Component Tests and General Diagnostics . If the system test is
not performed first it may result in serious or fatal injury.
