Challenger V8-5.7L (2010)
4. Remove the two inboard mounting screws (2) to the passenger airbag just below the distribution duct (1) and to the left of the distribution housing.
5. Remove the two outboard mounting screws (1) to the passenger airbag just below the distribution duct.
6. Remove the two passenger airbag mounting bolts (2) to the cross car beam.
7. Disconnect the passenger airbag electrical connector (3).
8. Maneuver the passenger airbag down in a way to clear any obstacles that may impede the removal of the airbag.
Passenger Air Bag - Installation