Challenger V8-5.7L (2010)
5. Install the two inboard mounting screws (2) to the passenger airbag just below the distribution duct (1) and to the left of the distribution housing.
Torque screws to 2.8 Nm (25 in. lbs.).
6. Install the two outboard mounting screws (1) to the passenger airbag just below the distribution duct. Torque screws to 2.8 Nm (25 in. lbs.).
7. Install the glove box assembly See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove
Box - Installation.