Challenger V8-5.7L (2010)
Power Door Lock Switch: Service and Repair
Power Lock Switch - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery System - Battery Reconnection .
1. Install window/lock switch (2) to door trim panel and snap into place.
2. Install door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Installation.
3. Connect negative battery cable.