Challenger V8-5.7L (2010)
5. Fold back the foam pad covering the fuel pump module plastic access covers.
6. Remove the left side fuel pump module plastic access cover.
7. Disconnect the electrical connector from the fuel pump module.
CAUTION: An indexing arrow is located on top of the fuel pump module to clock it's position into the fuel tank, note it's location for
reassembly.
NOTE: Prior to removing the fuel pump module, use compressed air to remove any accumulated dirt and debris from around fuel tank
opening.
8. Mark the fuel pump module orientation.
9. Position the lock-ring remover/installer 9340 (1) into the notches on the outside edge of the lock-ring.
