Challenger V8-5.7L (2010)
4. Remove the two retaining screws (2).
5. Remove the side impact sensor (3) from the door (1).
QUARTER PANEL MOUNTED SIDE IMPACT SENSOR
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service.
Failure to do so may result in accidental airbag deployment, which may result in serious or fatal injury.
2. Remove the lower quarter trim panel.See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Removal.
3. Disconnect the quarter panel mounted side impact sensor electrical connector (2).
4. Remove the two retaining screws (1).
5. Remove the quarter panel mounted side impact sensor (4).