Challenger V8-5.7L (2010)
Impact Sensor: Service and Repair
Impact Sensor - Installation
INSTALLATION
FRONT IMPACT SENSOR
1. Position the front impact sensor in the correct location and install the two retaining screws (2). Tighten screws (2) to 7 Nm (62 in. lbs.).
2. Connect the front impact sensor electrical connector (3).
NOTE: If replacing the left front impact sensor, the air intake system needs to be installed.
WARNING: Do not connect the battery negative cable See: Restraint Systems/Testing and Inspection/Component Tests and General Diagnostics . If
the system test is not performed first it may result in serious or fatal injury.
SIDE IMPACT SENSOR
DOOR MOUNTED SIDE IMPACT SENSOR
1. Position the door mounted impact sensor (3) in the correct location and install the two retaining screws (2). Tighten screws (2) to 7 Nm (62 in.
lbs.).
2. Connect the door mounted side impact sensor electrical connector (4).
3. Install the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Installation.
WARNING: Do not connect the battery negative cable See: Restraint Systems/Testing and Inspection/Component Tests and General Diagnostics . If
the system test is not performed first it may result in serious or fatal injury.
QUARTER PANEL MOUNTED SIDE IMPACT SENSOR