Challenger V8-5.7L (2010)
1. Disconnect the Wireless Ignition Node (WIN) harness connector.
2. Turn the ignition on.
3. Measure the voltage between the (T141) Clutch Interlock Signal circuit and ground.
Is there any voltage present?
Yes
-
Repair the short to voltage in the (T141) Clutch Interlock Signal circuit.
-
Perform the PCM VERIFICATION TEST. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/PCM Verification Test.
No
-
Go To 10
10. (T141) CLUTCH INTERLOCK SIGNAL CIRCUIT SHORTED TO GROUND
1. Turn the ignition off.
2. Measure the resistance between ground and the (T141) Clutch Interlock Signal circuit.
Is the resistance above 100 Ohms?
Yes
-
Go To 11
No