Challenger V8-5.7L (2010)
5. Remove the Power Distribution Center (PDC) cover (2).
6. Remove the battery positive cable to rear PDC fastener (3).
7. One at a time, free the battery positive cable from the routing clips located in the rear compartment area.
8. Remove the right, front seat See: Body and Frame/Seats/Service and Repair/Seat - Removal.
9. Remove the right, rear seat cushion. Pull upward at forward edge of each retainer loop of the rear seat cushion to disengage retainer loops from
cups in floor.
10. Remove the right cowl trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim Panel - Removal.
11. Remove the right quarter trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Removal.
12. Position carpet aside to gain access to the battery positive cable.
13. One at a time, free the battery positive cable from the routing clips located in the rear seat area.
