Challenger V8-5.7L (2010)
7. Check the supplier ID. Is the Supplier Marquardt?
a. No>>> Inspection is complete. Please refer to normal diagnostics for the customers concern.
b. Yes>>> Continue with step 8.
8. Now check the software version listed on the same page. Is the WIN software version lower than 10.02.01?
a. No>>> Inspection is complete check for other issues causing customer concern
b. Yes>>> Continue with the repair procedure step 9.
NOTE:
If this flash process is interrupted/aborted, the flash should be restarted.
9. Using the wiTECH Diagnostic Application for flashing a WIN is made available through the wiTECH Diagnostic Application. For instructions select
the "HELP tab on upper portion of the wiTECH window, then "HELP CONTENTS. This will open the Welcome to wiTECH Help screen were help
topics can now selected.
10. Clear any DTC's that may have been set in other modules due to reprogramming. The wiTECH application will automatically present all DTCs after
the flash and allow the tech to clear them.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
