Challenger V8-5.7L (2010)
1. Loosen the jam nut (3) at the inner-to-outer tie rod (4-5) connection.
2. Grasp the inner tie rod at the hex and rotate as necessary to adjust front toe to the preferred toe specification. See: Specifications/Wheel Alignment
3. Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) torque using care not to lose adjustment.
4. Make sure the inner tie rod-to-steering gear boot is not twisted, then reinstall the boot clamp at the inner tie rod.
5. Adjust front toe on opposite side of vehicle using the above procedure as necessary.
