Challenger V8-5.7L (2010)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Removal
Automatic Transmission
AUTOMATIC TRANSMISSION
1. Disconnect and isolate negative battery cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair/Air Cleaner Body - Removal.
4. Unthread tube nut, then remove pressure hose (2) from pump (1).
5. Raise and support vehicle See: Maintenance
6. Remove belly pan See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
