Challenger V8-5.7L (2010)
Repair/Procedures/Battery System - Battery Reconnection
13. Fill and bleed power steering system See: Service and Repair/Power Steering System Bleeding
Return Hose - Gear to Cooler
GEAR TO COOLER
1. Route cooler end of return hose (2) over steering gear from rear by reversing the steps used in removal.
NOTE: Always use a NEW O-ring on the end of the return hose at the steering gear.
2. Lubricate new O-ring on steering gear end of return hose with clean power steering fluid.
3. Lift gear end of return hose to return port on steering gear. Install return hose (2) to steering gear (1). Do not tighten tube nut at this time.