Challenger V8-5.7L (2010)
Tie Rod End: Service and Repair
Tie Rod End - Removal
Inner Tie Rod
INNER TIE ROD
1. Remove outer tie rod See: .
2. Remove tie rod jam nut from inner tie rod.
3. Remove clamp (1) securing bellows (3) to inner tie rod.
4. Remove clamp (2) securing bellows (3) to steering gear body.
5. Remove bellows (3).
6. Install appropriate inner tie rod removal tool on inner tie rod hex (1).
CAUTION: If inner tie rod cannot be removed using specified tools, do not use a hammer or heat to loosen. Damage to steering gear will occur.
Replace entire steering gear.
7. Unthread and remove inner tie rod (2).
