Challenger V8-5.7L (2010)
Control Arm: Service and Repair
Front Lower Control Arm - Installation
INSTALLATION
NOTE: If installing a lower control arm engine cradle bolt that is a wheel alignment adjustment bolt (1) (lengthwise grooved shaft (2)), make
sure to install it in the same position which it was in upon removal. For more details on installation of this special bolt, See:
Alignment/Service and Repair .
1. Slide lower control arm (4) into position in engine cradle and install mounting bolt from rear.
2. Install nut (1) on lower control arm cradle bolt, but do not tighten at this time.
