Challenger V8-5.7L (2010)
14. Install stabilizer bar bushing retainer halves (1)(2) around bushing (3).
15. Install bolts (2) securing stabilizer bar bushing retainer halves (1) to cradle. Tighten bolts to 60 Nm (44 ft. lbs.).
16. Install stabilizer bar heat shield (3) over stabilizer bar bushing retainer. Install mounting screws (1).
17. Install belly pan See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
