Challenger V8-5.7L (2010)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Pad - Installation
INSTALLATION
NOTE: While bleeding the clutch system be certain the clutch pedal returns to the most upright position. It may take as many as two hundred
clutch strokes to bleed the system. Do not let the brake/clutch fluid reservoir to empty out while bleeding the hydraulic system.
1. Install the clutch/brake pedal assembly (3), and the clutch/brake pedal assembly mounting fasteners (1) and (2). Tighten the fasteners to to 25 Nm
(19 ft.lbs.).
2. Reconnect the clutch hydraulic line (2).
3. Reconnect the brake/clutch fluid reservoir tube (3).
4. Reconnect the clutch starter interlock switch harness connector (1).