Challenger V8-5.7L (2010)
Seals and Gaskets: Service and Repair
Rear Axle - 215RII
Axle Shaft Seal - Removal
REMOVAL
1. Remove halfshaft(s).See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Half Shaft - Removal
2. Using suitable screwdriver (1), remove axle shaft seal (2).
3. Visually inspect halfshaft seal journal for damage (excessive seal groove, nicks, scratches, etc.). Replace halfshaft if necessary.
Axle Shaft Seal - Installation
INSTALLATION
1. Using Installer 9755 (2), install NEW axle shaft seal (1). Lubricate the inside diameter with Mopar(R) Gear and Axle Lubricant 75W-140 to
protect seal during halfshaft installation.
2. Install halfshaft(s). See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Half Shaft - Installation