Challenger V8-57L (2010) Axle Shaft Assembly Removal
CAUTION: Access to rear axle-to-crossmember bolts is best achieved by use of short socket and a flexible-head ratchet.
12. Remove two rear axle-to-crossmember bolts (1).
13. Carefully lower rear axle. While lowering axle, separate propeller shaft from axle and support with suitable rope or wire (1).
CAUTION: Unequal-length halfshafts are used. The right halfshaft is shorter than the left, and it is necessary to identify and tag halfshafts
upon removal to ensure proper installation.
14. Lower axle just enough to remove halfshafts one at a time. Shift axle assembly in one direction, compressing one halfshaft while removing the
other (1). Use caution to protect axle seal and journal.