Challenger V8-5.7L (2010)
NOTE: If re-using the original rear axle-to-crossmember bolts, clean the rear axle-to-crossmember bolts and apply a patch of blue
MOPAR(R) Lock & Seal medium strength thread locker to the rear axle-to-crossmember bolts. New bolts have a thread lock patch,
and do not require application of blue MOPAR(R) Lock & Seal medium strength thread locker
8. Install left rear axle-to-crossmember bolt (1) and tighten to 220 Nm (162 ft. lbs.).
NOTE: The rubber part of the axle isolator must face toward the cradle.
9. Install rear axle front mount isolator (3) as shown and torque fastener to 65 Nm (48 ft. lbs.).
