Challenger V8-5.7L (2010)
15. Remove fill plug (2) to check and adjust rear axle fluid level. Top off axle with Mopar(R) Gear and Axle Lubricant 75W-90. Reinstall fill plug and
torque to 35 Nm (25 ft. lbs.) torque.
16. Lower vehicle. Torque halfshaft hub nut (1) to 213 Nm (157 ft. lbs.). Install wheel center cap.
17. Install wheel(s) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
