dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Skip Shift Solenoid - Description|Page 2976 > < Transmission Skip Shift Solenoid - Description
Page 1
background image

Shift Solenoid: Description and Operation
Transmission Skip Shift Solenoid - Operation

OPERATION

The PCM controls the skip shift solenoid, locking out second and third gear when all of the following conditions are met:

-

Engine coolant exceeds 41°C (106°F)

-

Vehicle speed is between 12 and 20 MPH

-

Engine operating above 1322 RPM

-

The PCM verified first gear speed/RPM

-

Throttle position sensor (TPS) signal is less than 0.68 volt above closed throttle (23 percent throttle opening)

The solenoid resets when vehicle speed drops below 3 MPH.

Transmission Skip Shift Solenoid - Description|Page 2976 > < Transmission Skip Shift Solenoid - Description