Challenger SRT-8 V8-6.1L (2009)
4. Place a piece of tape onto the glass and mark a line 7.5 mm (0.30 in.) minimum down from the upper edge in the three places shown (1).
5. From the outside of the vehicle, with the door closed, use a suction cup or equivalent and simultaneously slide the glass to achieve the three
minimum glass engagement tape marks (1) and the door glass to quarter glass gap (3) and parallel measurements (4).
NOTE: It is sometimes helpful to snug or unsnug the rear glass attach fastener during this process.
NOTE: The jack screws work for minor crosscar adjustments and should only be used if there is a minimal adjustment crosscar required.
