Challenger SRT-8 V8-6.1L (2009)
Underbody Cover: Service and Repair
Belly Pan - Installation
INSTALLATION
NOTE: During installation, ensure rear belly pan is shingled underneath front belly pan. Failure to do so may result in damage to belly pan.
1. Position the rear belly pan (2) to the underside of the vehicle.
2. Install the fasteners (1) that secure the rear belly pan to the underside of the vehicle.
3. Position the front belly pan (1) to the underside of the vehicle.
4. Install the fasteners (2) that secure the front belly pan to the underside of the vehicle.
5. Install the fasteners that secure the front belly pan to the front fascia.
6. Install the push pins that connect the front belly pan to the front splash shields.
7. Lower the vehicle.