Challenger SRT-8 V8-6.1L (2009)
Console: Service and Repair
Floor Console - Installation
INSTALLATION
1. Position the floor console into the vehicle and connect the electrical connectors.
2. Install the fasteners (3) at the front of the center console. Tighten the screws to 3 Nm (27 in. lbs.).
3. Install the fasteners (2) into the rear bin. Tighten the bolts to 5 Nm (44 in. lbs.).
4. Position the console shifter bezel (1) into the vehicle.
5. Connect the electrical connectors.
6. Position the mat (5) into the console rear bin.
7. Install the shifter boot and bezel.